AD/ROTAX/15 - Inspection of Exhaust Bends

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B06662 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

Rotax Piston Engines

 

AD/ROTAX/15 Inspection of Exhaust Bends 12/2003

 

Applicability: Rotax 914 F series engines with Serial Number (S/N) 4,420.001 up to 4,420.363, if equipped with genuine Rotax exhaust bends Part Number (PN) 979420/421/422, 979430/431/432, 979440/441/442, and 979450/451/452.

 

Requirement: 1. Carry out a detailed visual inspection of the exhaust bends (exhaust tubes between cylinder head and exhaust) in accordance with instructions contained in Rotax Service Bulletin (SB) 914-017R1.

 

2. If cracks are detected when carrying out Requirement 1, replace the exhaust bend in accordance with the relevant Maintenance Manual.

 

Note: Austrian CAA AD 106R1 refers.

 

Compliance: For Requirement 1: Every 50 hours time-in-service (TIS) from the effective date of this Directive.

 

For Requirement 2: Before further flight.

 

This Airworthiness Directive becomes effective on 27 November 2003.

 

Background: Cracks have been detected on Rotax engine exhaust bends which could have been caused by a number of reasons outlined in the SB relevant to this Directive. The Austrian CAA requires inspection of the exhaust bends at regular intervals.


Jim Coyne

Delegate of the Civil Aviation Safety Authority 14 October 2003

 

 

 

 


The above AD is notified in the Commonwealth of Australia Gazette on 5 November 2003.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.