AD/RES/6 - Safety Belts - Mills ME 2402 and ME 2402T - Inspection and Rectification

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B06604 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Restraint Equipment

 

AD/RES/6 Safety Belts - Mills ME 2402 and

ME 2402T - Inspection and Rectification

Applicability: All Mills ME 2402 and ME 2402T safety belts.


6/71

 

Requirement: Inspect the left hand strap for peeling of the PVC tip. All belts with tips which have started to peel shall be rectified by either:

 

  1. Replacement of the left hand strap; or

 

2.    Cutting off the damaged tip, forming a two inch radius on the end of the webbing and dipping the end into a suitable adhesive to a depth of approximately one inch. Ensure that when set the adhesive is smooth and there is no excessive build-up on the faces of the webbing.

 

Compliance: Within one month after 30 June 1971, and thereafter at intervals not exceeding one month or 350 hours time in service whichever occurs first.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.