AD/PW100/8 - Fuel Manifolds

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B06387 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Pratt and Whitney Canada Turbine Engines - PW100 Series

 

AD/PW100/8 Fuel Manifolds 3/97

Applicability: All PW100 series engines.

 

Requirement: Install new fuel manifold transfer tubes and new lockplates in accordance with Pratt and Whitney Canada Service Bulletins, 21077R7 dated 10 October 1996 and 21373R3 dated 11 October 1996, respectively.

 

Note1: Later revisions of the referenced service bulletins or superseding service bulletins that meet the intent of the referenced service bulletins satisfy the requirements of this Directive.

 

Note2: Transport Canada AD CF-96-22 refers.

 

Compliance: Unless previously accomplished:-

 

(a)      At the next engine shop visit; or

 

(b)     No later than the next fuel nozzle change; or

 

(c)     Prior to 30 November 1998; whichever occurs first.

This Directive becomes effective 27 February 1997.

 

Background: There have been reports of fuel leaks which have resulted in fire warnings and inflight shutdowns. The majority of these fuel leaks have occurred shortly after fuel manifold maintenance. The manufacturer has advised that the fuel manifold transfer tube lockplates are sensitive to installation errors and are a contributing factor to the fuel leaks.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.