AD/PL 12/8 Amdt 3 - Stub Wing Spar

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B06273 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Transavia PL 12 Series Aeroplanes

 

AD/PL 12/8

Amdt 3

Applicability: All models.


Stub Wing Spar 7/90 DM

 

Requirement: Carry out detailed visual inspection of the complete stub wing main spar for corrosion and cracking paying particular attention to the areas adjacent to the fish plates welded to the rear face of the spar web at the fuselage sides, right angle stiffener, inboard of MLG pylons and all other welds in the spar web. The inspection is to be performed after removal of the lower cowl and access panels. The use of a strong light source and sight aid is recommended. Any cracks found are to be repaired, corrosion to be removed, area blended, checked within limits, repaired as required and reprotected before further flight.

 

Compliance: At the next scheduled inspection for issue of a Maintenance Release after 25 April 1990, and thereafter at intervals not exceeding 100 hours time in service.

 

Background: Amendment 3 has been issued to require further inspection of stub wing spar as a result of severe corrosion and cracking being reported in the area inboard of MLG.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.