AD/PA-32/61 - Stabilator Skin - Inspection

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B05858 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Piper PA-32 (Cherokee Six) Series Aeroplanes

 

AD/PA-32/61 Stabilator Skin - Inspection 6/79

Applicability: All models PA-32-260, PA-32-300, PA-32R-300 and PA-32RT-300 and PA-32RT- 300T.

 

Requirement: 1. Visually inspect the upper and lower surfaces of the stabilator for skin cracking at the spanwise lap joint at the front spar location. The accompanying sketch shows the area to be inspected. Particular attention should be given to the lower surface.

 

2. It is requested that the results of the inspection, even if no damage is discovered, be reported to an Airworthiness Office of the Department so that a thorough assessment of any general problem can be made. It is further requested that the presence or otherwise of a joggle or kink in th skin, as identified in the sketch also be reported to the Department. A verbal report will suffice if no cracking is present.

 

Compliance: Within 25 hours time in service after 8 June 1979.

 

Background:  Investigations into a recent accident involving an inflight structural break-up have disclosed the presence of an extensive fatigue crack in the lower surface of one side of the stabilator. As the investigation is not yet completed, this inspection is of a precautionary nature intended to assess the extent of any problem.


COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.