AD/PA-32/53 - Engine Control Rod End Bearings - Inspection and Replacement

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B05850 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Piper PA-32 (Cherokee Six) Series Aeroplanes

 

AD/PA-32/53 Engine Control Rod End Bearings - Inspection

and Replacement


12/77

 

Applicability: Models PA32-260 with S/Nos. 32-1111 to 32-7700013. PA32-300 with S/Nos. 32- 40566 to 32-7740040. PA32R-300 with S/Nos. 32R-7680001 to 32R-7780215.

 

Requirement: 1. Inspect the rod end bearing assemblies attached to the mixture, throttle and propeller governor control cables for comparison with the illustration.

 

2. If a rod end bearing is installed as identified in the illustration as number one (1), it should be replaced with a rod end bearing corresponding to number two (2) or number three (3) of the illustration.

 

Compliance: Within 25 hours time in service after 22 November 1977.

 


COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.