AD/OXY/14 - Puritan Bennett Aero Systems Sweep-On Model 200 Crew Oxygen Masks

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B11425 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Oxygen Systems

 

AD/OXY/14 Puritan Bennett Aero Systems Sweep-On

Model 200 Crew Oxygen Masks


13/94 DM

 

Applicability: Puritan Bennett Aero Systems Sweep-On Model 2000 crew oxygen masks, part number series and serial number range indicated below, that do not have a tamper seal:

 

174250-Series 00001 to 00005 inclusive

 

174252-Series 00001 to 00112 inclusive

 

174260-Series 00001 to 00236 inclusive

 

174262-Series 00001 to 00015 inclusive

 

Note: These oxygen masks are known to be installed in, but not limited to the following aircraft series:

 

Beech Model 400

 

Cessna Model 500, 501, 550, S550, 551 and 650 Dassault Mystere Falcon Model 20

Dornier Model 228 and 328

 

Gulfstream Model G-1159 (G-II) and G-1159A (G-III) Raytheon Corporate Jets Model HS 125-700

Requirement: Action in accordance with Puritan Bennett Aero Systems Service Bulletin 174250-35- 1 dated August 1994.

 

Note: FAA AD 94-19-06 Amdt 39-9028 refers.

 

Compliance: Prior to 31 December 1994.

 

Background: The FAA has received several reports of difficulty in exhaling into Sweep-On 2000 oxygen masks due to misalignment of the demand diaphragm. Compliance with this Directive will ensure that the demand diaphragm is properly aligned in the mask, allowing correct operation of the exhalation valve.

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.