AD/LJ45/6 - Horizontal Stabiliser Actuator Assembly

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B11167 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

Learjet 45 Series Aeroplanes

 

AD/LJ45/6 Horizontal Stabiliser Actuator Assembly 10/2003

TX

 

Applicability: All Learjet Model 45 series aeroplanes fitted with Horizontal Stabilizer Actuator Assembly (HSAA) Part Number (P/N) 6627401000-005.

 

Requirement: 1. Remove from service HSAA P/N 6627401000-005.

 

2. Do not install HSAA P/N 6627401000-005 on any aeroplane as a replacement part.

 

Note 1: FAA AD 2003-16-19 Amdt 39-13272 refers.

 

Note 2: At the time of this Directive there are no replacement HSAA’s approved for fitment to the aeroplane.

 

Note 3: AD/LJ45/5 required fitment of HSAA P/N 6627401000-005 as a replacement part for P/N 6627401000-001 or 2A9200F HSAA’s. This Directive augments those requirements.

 

Compliance: For Requirement 1: Before further flight as of the effective date of this Directive.

 

For Requirement 2: As of the effective date of this Directive.

 

This Airworthiness Directive becomes effective on 15 August 2003.

 

Background: The HSAA P/N 6627401000-005 was not manufactured to the type design data. A brittle fracture could occur on the acme screw and nut within the assembly that could result in a loss of control of the aeroplane.


Jim Coyne

Delegate of the Civil Aviation Safety Authority 14 August 2003


The above AD is notified in the Commonwealth of Australia Gazette on 15 August 2003.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.