AD/JETSTREAM/86 - Rudder Quadrant Support Structure

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10955 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 



British Aerospace BAe 3100 (Jetstream) Series Aeroplanes

 

AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

 

AD/JETSTREAM/86 Rudder Quadrant Support Structure 5/2000

Applicability: All Series 200 and Jetstream 3100 and 3200 Series aircraft excluding Constructors numbers 936 and 940.

 

Requirement: Inspect in accordance with BAe Mandatory Service Bulletin (SB) 53-JA-990842 or 53-JA-990842 Revision 1.

 

On aircraft where this inspection and repair has been carried out in accordance with SB 53-JA-990842, a check is required to ensure correct rivets have been used.

 

Note: UK CAA AD 006-12-99 refers.

 

Compliance: Before 31 December 2000, unless already accomplished.

 

This Airworthiness Directive becomes effective on 18 May 2000.

 

Background:  Occurrences of damage to the rudder quadrant support structure have been reported. The damage relates to cracking of the support structure upper edge member radii and bottom diaphragm radii adjacent to the rudder artificial feel assembly attachment.

The damage is caused by incorrectly installed profiled D-washers which are designed to reinforce the radii when they are installed correctly.


 

Bernard Malcolm Hole

Delegate of the Civil Aviation Safety Authority 4 April 2000

 

 

 

 

 

 

 

 

 

 


The above AD is notified in the Commonwealth of Australia Gazette on 19 April 2000.

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.