AD/HU 369/112 - Main Rotor Drive Shaft

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10672 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

McDonnell Douglas (Hughes) and Kawasaki 369 Series Helicopters

 

AD/HU 369/112 Main Rotor Drive Shaft 11/2003

 

Applicability: Model 600N, fitted with main rotor drive shaft assembly, part number (P/N) 600N5510-1.

 

Requirement: 1. Unless previously accomplished revise the component history card or equivalent record for drive shaft, P/N 600N5510-1, by changing the life limit from 16,000 to 14,000 hours time in service (TIS).

 

2. Replace any drive shaft that has 14,000 or more hours TIS with an airworthy drive shaft

 

Note: FAA AD 2003-16-11 Amdt 39-13264 refers.

 

Compliance: For Requirement 1: Within 100 flight hours from the effective date of this Directive.

 

For Requirement 2: Before further flight, following the completion of Requirement 1 of this Directive.

 

This Airworthiness Directive becomes effective on 30 October 2003.

 

Background: A review of final fatigue test data indicates that the life limit of the drive shaft should be reduced by 2000 hours time-in-service (TIS). The actions specified by this AD are intended to prevent failure of the drive shaft, loss of drive of the main rotor system, and subsequent loss of control of the helicopter.


Jim Coyne

Delegate of the Civil Aviation Safety Authority 18 September 2003

 

 

 

 


The above AD is notified in the Commonwealth of Australia Gazette on 8 October 2003.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.