AD/HU 269/56 - Tailboom Support Strut End Fittings - Inspection and Modification

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10618 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Schweizer (Hughes) 269 Series Helicopters

 

AD/HU 269/56  Tailboom Support Strut End Fittings - Inspection and Modification


11/76

 

Applicability: All models with tailboom support strut end fittings P/N 269A2015 or 269A2015-5. Document:              Hughes SIN No. N-109.2.

Compliance: For Step I - At each daily or overnight inspection after 6 October 1976.

 

For Step II - Within 50 hours time in service after 6 October 1976 and thereafter at intervals not exceeding 50 hours time in service.

 

For Step III - Within 500 hours time in service after 6 October 1976 or before 31 October 1977, whichever occurs first.

 

Note: Step I of this Directive shall be entered on the maintenance release as maintenance required. The inspection may be performed by the pilot in command, in which case certification is not required. In all other cases certification may be made on the maintenance release. This inspection may also be performed and certified by any Licensed Aircraft Maintenance Engineer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.