AD/HS 125/172 - Rosemount Pitot Probes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10455 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

British Aerospace BAe 125 Series Aeroplanes

 

AD/HS 125/172 Rosemount Pitot Probes 8/2004

 

Applicability: Model Hawker 800XP aeroplanes having serial number 258266 and serial numbers 258277 through 258500 inclusive.

 

Requirement: 1. Replace the existing Rosemount Aerospace 853JF pitot probes with new Rosemount Aerospace 853JF1 pitot probes (includes installing a new ammeter, two new shunts, and improved electrical writing), in accordance with paragraph

3.A. of the Accomplishment Instructions of Raytheon Service Bulletin SB 34- 3412, dated March 2001.

 

2. Rosemount Aerospace 853JF pitot probe or an ammeter having P/N 2132-01- 0017, shall not be installed on any aeroplane as a replacement part.

 

Note: FAA AD 2004-09-26 Amdt 39-13616 refers.

 

Compliance: For Requirement 1 - At the next scheduled 24-month inspection, but no later than 6 months after the effective date of this Directive.

 

For Requirement 2 - As of the effective date of this Directive.

 

This Airworthiness Directive becomes effective on 5 August 2004.

 

Background: This Directive requires replacement of certain existing pitot probes with new probes.

This action is necessary to prevent loss or fluctuation of indicated airspeed, which could result in hazardously misleading information being provided to the flight crew.


James Coyne

Delegate of the Civil Aviation Safety Authority 23 June 2004

 

 

 


The above AD is notified in the Commonwealth of Australia Gazette on 14 July 2004.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.