AD/GBK 117/10 - Introduction of a Life Limit on Tail Rotor Drive Bevel Gear

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10257 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Eurocopter BK 117 Series Helicopters

 

AD/GBK 117/10 Introduction of a Life Limit on Tail Rotor Drive Bevel Gear


3/98

 

Applicability: Eurocopter MBB-BK 117 helicopters Serial Number (S/N) 7001 - 7250 (incl) and 7500 - 7509 (incl).

 

Requirement: Enter a life limitation of 18,500 hours against Bevel Gear 117-12215-01(tail rotor (output) drive unit of the main transmission) in the Accessory Replacement Record and Historical Record “Main Transmission”. To calculate the replacement time for the installed bevel gear, the total operating time for the component needs to be known. If this is not known, the total operating time for the component shall be considered to be the operating time of the main transmission.

 

Note: LBA AD 97-350 dated 18 December 1997 refers.

 

Compliance: Action must be performed by 31 March 1998.

 

This airworthiness directive becomes effective on 26 February 1998.

 

Background: The working life of the tail rotor (output) drive unit of the main transmission has been recalculated by the manufacturer. This has resulted in the introduction of a life limit on bevel gear part number 117-12215-01 of 18,500 hours.

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.