AD/G159/32 Amdt 1 - Jumpseat Placard - Installation

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10076 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA CIVIL AVIATION ORDERS CIVIL AVIATION SAFETY AUTHORITY                            PART 105 SCHEDULE OF AIRWORTHINESS DIRECTIVES


GULFSTREAM (GRUMMAN) G.159 SERIES AEROPLANES

 

AD/G159/32 Amdt 1 Jumpseat Placard - Installation 6/78

Applicability: All models.

 

Requirement: To prevent injury to an occupant of any jumpseat located between fuselage stations 119 and 169, accomplish one of the following :-

 

  1. Install a placard either on the bulkhead adjacent to the jumpseat or any equivalent location approved by the Secretary utilising a minimum of 3/16 inch (5mm) high lettering with the wording “JUMPSEAT OCCUPANCY DURING TAXI, TAKEOFF OR LANDING PROHIBITED”.

 

2.    Modify in the following manner:

 

Install the nose landing gear drag strut (fused) or bulkhead modification in accordance with GAAC Service Change No. 226, Part 1 or Part 11 as applicable.

 

The placard described in sub-para. 1 may be removed on the incorporation of either modification detailed in sub-para. 2 or for the period of extension of compliance granted by concession.

 

Compliance: Within 10 hours time in service after 15 May 1978, unless already accomplished.

 

Note 1: No concession extending this compliance after 8 November 1979 shall be granted.

 

Note 2: No concession extending this compliance to a date prior to 8 November 1979 shall be granted unless evidence of a firm commit ment by GAAC on the available date for the modification kit for that S/No. aircraft is supplied to the Secretary by

21 July 1978.

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.