AD/G1159/21 Amdt 1 - Jumpseat Placard - Installation

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B10023 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Gulfstream (Grumman) G1159 and G-IV Series Aeroplanes

 

AD/G1159/21

Amdt 1

Applicability: All models.


Jumpseat Placard - Installation 6/78

 

Requirement: To prevent injury to an occupant of any jumpseat located between fuselage stations 119 and 169, accomplish one of the following:

 

  1. Install a placard either on the bulkhead adjacent to the jumpseat or any equivalent location approved by the Secretary, utilising a minimum of 3/16 in. (5mm) high lettering with the wording “JUMPSEAT OCCUPANCY DURING TAXI, TAKEOFF OR LANDING PROHIBITED”.

 

2.    Install the nose landing gear wheel-well bulkhead modification to eliminate drag strut penetration in accordance with GAAC Service change No. 226 Part 11.

 

The placard described in sub-para. 1 may be removed on the incorporation of either the modification detailed in sub-para. 2 or for the period of extension of compliance granted by concession.

 

Compliance: Within 10 hours time in service after 15 May 1978, unless already accomplished.

 

Note 1: No concession extending this compliance beyond 8 November, 1979 shall be granted.

 

Note 2: No concession extending this compliance to a date prior to 8 November, 1979 shall be granted unless evidence of a firm commitment by GAAC on the available date for the modification kit for that S/No. aircraft is supplied to the Secretary by 21 July 1978.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.