AD/EXTRA/3 - Elevator Mass Balance

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B09602 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Extra EA-300 Series Aeroplanes

 

AD/EXTRA/3 Elevator Mass Balance 5/95

Applicability: Extra EA-300 Serial Numbers V1, 001 to 034.

 

Requirement: 1. Inspect the elevator mass balance attachment plate using the fluorescent dye penetrant method in accordance with CAO 108.10. Inspect in accordance with Extra Service Bulletin (SB) 300-1-92, Part I.

 

2. Replace the existing mass balance with the new reinforced mass balance (P/N PC- 33202.1B), in accordance with Extra SB 300-1-92, Part II. No aerobatic flights are to be flown until the aircraft is in compliance with this Requirement.

 

Note: German LBA AD 92-199 refers.

 

Compliance: 1. Inspect before further flight after 29 March 1995.

 

2. Replace before further flight if damage is detected. If no damage is detected, replace before 25 hours time in service after 29 March 1995.

 

Background: Reports have been received of cracking of the elevator mass balance arm. Failure of the arm will cause the elevator to flutter and probably the loss of the elevator and aeroplane.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.