COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Embraer EMB-110 (Bandeirante) Series Aeroplanes
AD/EMB-110/44
Amdt 3
Elevator Trim Actuator Support 5/93
Applicability: Model EMB-110 series aircraft.
Requirement: 1. Action IAW the Technical Requirements of Brazilian AD T91-07-02.
The trim actuator shall be removed to facilitate this inspection.
2. Install a P/N 110-3210-25 actuator support fitting.
Note 1: Cracks have also been found in the elevator spar adjacent to the mounting attachment holes, and in the lugs of the elevator trim tab support bracket.
Note 2: CTA AD 93-02-01 and Embraer ASB 110-027-A090 refer.
Compliance: 1. Within 300 hours time in service after the last compliance with the previous issue of this Directive, and thereafter at intervals not to exceed 300 hours time in service; until compliance with Requirement 2.
2. Unless already accomplished, within 1200 hours TIS after 29 April 1993.
Background: As the result of an in-flight flutter incident in Australia, checks were instituted and a number of aircraft were found to have significant damage. In-flight failure could lead to loss of the aircraft. Amendment 1 was issued to reflect the requirements of the Country of Origin AD which had been issued in response to cracking around the actuator support. Amendment 2 was issued following a review of the calendar time compliance requirement. Calendar time was not considered to be relevant to crack growth in this instance, and the Directive is therefore amended. Amendment 3 is issued in response to a new Brazil CTA AD which requires installation of an improved support fitting and thereby constitutes terminating action of the ongoing repetitive inspections.