AD/EC 120/2 Amdt 2 - Engine to Main Gearbox (MGB) Coupling Tube Assembly

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B09308 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/EC-120/2 Amdt 1 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

 

Eurocopter EC 120 Series Helicopters

 

AD/EC-120/2

Amdt 2


Engine to Main Gearbox (MGB) Coupling Tube Assembly


5/2002

 

 

Applicability:  All Eurocopter EC 120B helicopters equipped with engine to MGB coupling tube assembly P/N C631A1002101.

 

Requirement: Remove engine to MGB coupling tube assembly, P/N. C631A1002101 and associated engine support assembly components from service, in accordance with Eurocopter Service Bulletin EC 120.

 

Note: DGAC AD 2000-058-003(A) R1 refers.

 

Compliance: Effective 16 May 2002; engine to MGB coupling tube assembly, P/N. C631A1002101 and associated engine support assembly components may not be installed in an aircraft from when this amendment becomes effective.

 

This Amendment becomes effective on 16 May 2002.

 

Background: This Directive was issued to address reports of cracks occurring in the engine to MGB coupling tube assembly that could result in failure of the tube occasioning an autorotation landing. This amendment reflects the DGAC declaring coupling tube P/N C631A1002101 and associated engine support fittings to be non-airworthy.

 

Amendment 1 of this Airworthiness Directive became effective on 23 March 2000.

 

The original issue of this Airworthiness Directive became effective on 17 September 1999.


 

Eugene Paul Holzapfel

Delegate of the Civil Aviation Safety Authority 7 April 2002

 

 

 

 

 

 

The above AD is notified in the Commonwealth of Australia Gazette on 24 April 2002.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.