AD/DHC-8/22 Amdt 1 - Bulkhead Smoke Seal

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B09177 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Bombardier (Boeing Canada/De Havilland) DHC-8 Series Aeroplanes

 

AD/DHC-8/22

Amdt 1


Bulkhead Smoke Seal 12/93

 

Applicability: Model DHC-8 series 100A aircraft with serial numbers 191 and 225 through 307. Requirement:               Install close out block seals in accordance with de Havilland SB 8-25-80 Rev A.

Note: Transport Canada AD CF-92-16 refers.

 

Compliance: Unless already accomplished in accordance with the previous issue of the Requirement Document; prior to 11 March 1994.

 

Background: During the introduction of furnishing improvements by the manufacturer, close out block seals on the cabin/baggage compartment bulkhead were omitted on some aircraft. With no block seals installed, a direct smoke path exists between the baggage compartment and the cabin.

 

Amendment 1 is issued in response to a revision of the Requirement Document which expands applicability and adds an inspection requirement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.