AD/DHC-6/74 - State of Design Airworthiness Directives

CIVIL AVIATION ACT 1988

CIVIL AVIATION SAFETY REGULATIONS 1998

ISSUE OF AIRWORTHINESS DIRECTIVE

Under section 98 of the Civil Aviation Act 1988, the Governor-General may make regulations for the purposes of the Act and in the interests of the safety of air navigation.  Under regulation 39.001 of the Civil Aviation Safety Regulations 1998, CASA may issue airworthiness directives (ADs) for kinds of aircraft or aeronautical products.  Subregulation 39.001(5) of the Civil Aviation Safety Regulations 1998 provides that an AD is a disallowable instrument for the purposes of section 46A of the Acts Interpretation Act 1901. Therefore, in accordance with section 6 of the Legislative Instruments Act 2003, an AD is a legislative instrument.

Under Annex 8 to the Convention on International Civil Aviation, the State of Design has overall responsibility for continuing airworthiness of an aircraft type, and must provide any information necessary to ensure the continuing airworthiness of a type to appropriate States of Registry.  ADs (and their equivalents) are the most common form of continuing airworthiness information, and are issued by most ICAO Contracting States.

The State of Registry of an individual aircraft is responsible for its continuing airworthiness.  Under Annex 8, the State of Registry must develop or adopt requirements to ensure the continuing airworthiness of aircraft.  When a State of Design issues an AD against a type of aircraft on the Australian Register, CASA, as Australia’s national airworthiness authority, must assess that information and, if appropriate, issue an Australian AD to mandate the requirements of the State of Design.

Transport Canada has issued the ADs listed in Schedule 1 affecting de Havilland DHC-6 model aircraft.  Canada is the State of Design for these types.  CASA has assessed the individual ADs and has issued Australian AD/DHC-6/74, which will become effective on 31 August 2006.  This AD requires compliance with all applicable Transport Canada ADs listed in Schedule 1.

As this AD is issued because of Australia’s obligations under Convention on International Civil Aviation, and because it is issued in response to an AD raised by the relevant State of Design, no consultation of the Australian public has taken place on this AD.  The Office of Regulatory Review has determined that ADs do not require a Regulatory Impact Statement.

The AD has been made by the Manager, New Technologies and Systems, in the Manufacturing, Certification and New Technologies Office, on behalf of CASA, in accordance with subsection 84A (2) of the Act.

Schedule 1