AD/DH 104/7 - Fuselage - Inspection

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B08885 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


DH 104 (Dove) Series Aeroplanes

 

AD/DH 104/7 Fuselage - Inspection 8/71

Applicability: All models.

 

Requirement: 1. Remove the bottom rear wing root fairings around the port and starboard rear spar attachment fittings and inspect the fuselage skin for buckling in those areas.

 

2.    Release the appropriate inspection panel in the keel and examine the rear spar transverse frames for buckling or other damage on both port and starboard sides.

 

3.    Remove the rear cabin heater ducts and run the fingers down the double frame inside the fuselage, from the lower window rail to the floor between windows Nos. 3 and 4 (numbering from the front) and feel for buckling. Pay particular attention to the area on both sides from the floor level to approximately 15 inches above it.

 

4.    If buckling has occurred, repair the fuselage to the satisfaction of the Secretary before further flight.

 

Compliance: For Paras. 1 and 2 - At intervals not exceeding 300 hours time in service.

 

For Paras. 1, 2 and 3 - Before further flight after a heavy landing.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.