AD/DH 104/15 Amdt 2 - Wing Lower Root Joint Fittings P/Nos. 4W 271 and 4W 5013 - Inspection

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B08859 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


DH 104 (Dove) Series Aeroplanes

 

AD/DH 104/15

Amdt 2

Applicability: All Models.


Wing Lower Root Joint Fittings P/Nos.

4W 271 and 4W 5013 - Inspection


2/73

 

Requirement: 1. Inspect Root Joint Fitting Part No. 4W271 or 4W5013 for the presence of chrome plating in the bore of the main attachment bolt hole in accordance with De Havilland TNS CT(104) No. 178 Issue 1 following the procedures set out in that document with the following exception.

 

2.    Rectification and Re-Assembly.

 

(a)     When the results of the test prove that chrome plating is present, the fitting must be changed forthwith.

 

(b)     Replacement of the wing fitting should be carried out to the provisions of Repair Drawing RD 4W131 a copy of which may be obtained from the Service Department, De Havilland Aircraft Co. Ltd., Hatfield, Hertfordshire, England.

 

(c)     In all cases (whether chrome is found or not) the main attachment bolt should be examined for serviceability, refitted and the joint resealed in accordance with the provisions of TNS CT(104) No. 168 Issue 4.

 

Compliance: Before 30 March 1973.

 

NOTE: Where both inspection for and rejection of chromed fittings has been carried out under the previous issue of this Directive, no further action is necessary.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.