AD/CF6/32 - Oil Quantity and Flame Arrestor Plug

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B08475 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


General Electric Turbine Engines - CF6 Series

 

AD/CF6/32 Oil Quantity and Flame Arrestor Plug 2/95

Applicability: CF6-80C2 Engines.

 

Requirement: Action in accordance with the technical requirements of FAA AD 94-20-06.

 

Note: General Electric Service Bulletin 72-648 Revision 1 of 11 January1993 refers.

 

Compliance: As specified in the FAA AD with an effective date of 2 February 1995.

 

Background:  This Directive requires repetitive oil quantity checks after engine start-up before taxi and the installation of a flame arrestor plug in the aft end of the centre vent tube as terminating action to the repetitive oil quantity checks. These actions are prompted by three reports of uncontained engine failure when fire from fuel contamination in the oil systems caused separation of fan mid-shafts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.