AD/CESSNA 550/9 - Airframe Ice Protection System Proportioning Units

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B08437 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Cessna 550 (Citation II) Series Aeroplanes

 

AD/CESSNA 550/9 Airframe Ice Protection System

Proportioning Units

Applicability: All model S550 with unit numbers -0001 to -0075.


2/86

 

Requirement: 1. Install the following placard on the instrument panel in full view of the pilot using letters of at least 5mm in height: “Flight into Known or Forecast Icing Prohibited”.

 

2. Perform the requirements of FAA AD 85-24-04 paragraphs B.1, 2, 3 and 4.

 

Compliance: 1. Prior to further flight after 20 December 1985 until the actions of paragraph 2 of the Requirement have been complied with.

 

2. Within 100 hours time in service after 28 February 1986.

 

Background:  The manufacturer has identified a production error resulting in incorrect installation of fluid ice protection system proportioning units. This Directive removes approval for flight into icing conditions and requires inspection and replacement, as necessary, of the fluid protection system proportioning units.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.