CIVIL AVIATION ACT 1988
CIVIL AVIATION SAFETY REGULATIONS 1998
ISSUE OF AIRWORTHINESS DIRECTIVE
Under section 98 of the Civil Aviation Act 1988, the Governor-General may make regulations for the purposes of the Act and in the interests of the safety of air navigation. Under regulation 39.001 of the Civil Aviation Safety Regulations 1998, CASA may issue airworthiness directives (ADs) for kinds of aircraft or aeronautical products. Subregulation 39.001(5) of the Civil Aviation Safety Regulations 1998 provides that an AD is a disallowable instrument for the purposes of section 46A of the Acts Interpretation Act 1901. Therefore, in accordance with section 6 of the Legislative Instruments Act 2003, an AD is a legislative instrument.
Under Annex 8 to the Convention on International Civil Aviation, the State of Design has overall responsibility for continuing airworthiness of an aircraft type, and must provide any information necessary to ensure the continuing airworthiness of a type to appropriate States of Registry. ADs (and their equivalents) are the most common form of continuing airworthiness information, and are issued by most ICAO Contracting States.
The State of Registry of an individual aircraft is responsible for its continuing airworthiness. Under Annex 8, the State of Registry must develop or adopt requirements to ensure the continuing airworthiness of aircraft. When a State of Design issues an AD against a type of aircraft on the Australian Register, CASA, as Australia’s national airworthiness authority, must assess that information and, if appropriate, issue an Australian AD to mandate the requirements of the State of Design.
CASA has raised AD/CESSNA 400/102 Amendment 4 to correct an unsafe situation on Cessna 425 and 441 aircraft. Australian examples of these two types have been found with cracks in the elevator forward spar, which, if not corrected, could result in a loss of control of the aircraft. The State of Design for these types, the USA, has not yet taken action to correct this unsafe condition. As there are several examples of these types on the Australian register, CASA has developed an AD to correct the problem on Australian aircraft.
CASA has not consulted with the Australian industry and public, because this amendment reduces the burden on operators by increasing the interval between inspections to allow the elevator spar to be checked during other, scheduled, maintenance. The change has been made at the request of an Australian operator.
The Office of Regulatory Review has determined that ADs do not require a Regulatory Impact Statement.
The AD has been made by the Manager, Airframes in the Manufacturing, Certification and New Technologies Office, on behalf of CASA, in accordance with subsection 84A (2) of the Act.