AD/CESSNA 303/8 - Slick Pressurized Magnetos

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B08135 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Cessna T303 Series Aeroplanes

 

AD/CESSNA 303/8 Slick Pressurized Magnetos 4/89

Applicability: All Cessna T303 aircraft fitted with Slick model 6220 or 6224 pressurized magnetos.

 

Requirement: 1. Fabricate and install on the instrument panel in clear view of the pilot, a clearly legible placard with the following wording;

 

PRIOR TO EACH FLIGHT, CONDUCT MAGNETO CHECKS IN ACCORDANCE WITH AFM AMENDMENT INTRODUCED BY AD/CESSNA 303/9.

 

2.         Action in accordance with Slick SB 1-88 Paragraph III, 100 hour inspection.

 

Note: AD/CESSNA 303/9, FAA AD 88-25-04 and Teledyne Continental Service Bulletin M88-14 also refer.

 

Compliance: 1. Within 100 hours TIS after 20 April 1989 and concurrent with AD/CESSNA 303/9.

 

2.a.   Within 100 hours TIS after 20 April 1989, and then at intervals not exceeding 100 hours TIS following this initial inspection.

 

2.b.  Whenever the magnetos fail the AFM check introduced by AD/CESSNA 303/9.

 

Background:  Slick have advised that the magneto installations on the applicable aircraft are susceptible to moisture contamination which could result in engine stoppage.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.