AD/CESSNA 170/59 Amdt 1 - Horizontal Stabiliser Front Spar

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B04987 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/CESSNA 170/59 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

 

Cessna 170, 172, F172, FR172 & 175 Series Aeroplanes

 

AD/CESSNA 170/59

Amdt 1


Horizontal Stabiliser Front Spar 3/2001

 

 

Applicability: All Model 172 and 175 series aircraft, all Reims Model F172 and FR172 series aircraft; except Models 172R & 172S, and subsequent.

 

Requirement: Visually inspect the horizontal stabiliser front spar for cracking in accordance with Cessna Service Bulletin SEB94-8.

 

Compliance: At intervals not to exceed 100 hours time in service.

 

This amendment becomes effective on 22 March 2001.

 

Background:  A number of instances of cracking of the horizontal stabiliser front spar have been reported. In July 1984 the Authority issued AAC 153-2 highlighting the problem. The most likely cause was incorrect ground handling; pushing down on the stabiliser to lift the nose wheel. However cracks continue to be reported and in one instance the spar was reported to have been completely severed. Reports have also been received of cracking of modified and reinforced spars, Cessna P/N 0532001-98.

 

The intent of this Directive is not applicable to later Model 172 aircraft, and is amended accordingly.

 

The original issue of this Airworthiness Directive became effective on 17 August 1995.


 

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 24 January 2001

 

 


The above AD is notified in the Commonwealth of Australia Gazette on 21 February 2001.

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.