AD/BN-2/71 Amdt 4 - Main Landing Gear Oleo Attachment Bracket

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B04784 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/BN-2/71 Amdt 3 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

Pilatus Britten-Norman BN-2 Series Aeroplanes

 

AD/BN-2/71

Amdt 4


Main Landing Gear Oleo Attachment Bracket 7/2004

 

Applicability: All BN-2, BN2A, BN2B, BN2T, BN2T-4R, and BN2T-4S Islander aircraft. Requirement:              Inspect in accordance with B-N Group Ltd. Mandatory Service Bulletin No. 273

Issue 5.

 

Note: UK CAA AD 005-09-2000 refers.

 

Compliance: As specified in the Requirement document.

 

This Amendment becomes effective on 8 July 2004.

 

Background: Several operators reported cracking of the Oleo Attachment Bracket NB-40-0075. If cracking is not detected early, failure of the bracket can occur which could result in detachment of the main landing gear.

 

Amendment 1 expanded the repeat inspection interval.

 

Amendment 2 introduced a steel oleo attachment bracket as terminating action for the repeat inspection requirement.

 

Amendment 3 introduced Mod. NB-M-1712, which embodies an improved fitting for the main landing gear.

 

Amendment 4 is issued in response to Issue 5 of the Requirement document, which introduces a note to the compliance statement.


David Villiers

Delegate of the Civil Aviation Safety Authority 26 May 2004

 

 

 

The above AD is notified in the Commonwealth of Australia Gazette on 16 June 2004.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.