AD/BELL 47/32 Amdt 2 - Main Rotor Mast Thrust Bearing

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B04687 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Bell Helicopter Textron 47 (All Variants) Series Helicopters

 

AD/BELL 47/32

Amdt 2


Main Rotor Mast Thrust Bearing 10/86

 

Applicability: All model 47 series equipped with main rotor mast thrust bearing P/N 47-130-110-1.

 

Requirement:  1. Inspect the engine oil filter for evidence of metal particles. If the installation incorporates a scavenge oil filter, this filter shall also be inspected for metal particles.

 

2. If metal particles are found during any inspection of the oil filter(s) the source of the contaminant shall be located and eliminated and other components of the engine and transmission which may have been damaged by metal particles shall be inspected and overhauled as prescribed by the appropriate Bell maintenance manual. The main rotor mast thrust bearing P/N 47-130-110-1 shall be thoroughly inspected and replaced with a like component if found to be unserviceable.

 

Note: FAA AD 62-23-2 and Japan AD TCD 282-2 refers.

 

Compliance: Paragraph 1 - Every 25 hours time in service.

 

Paragraph 2 - Before further flight.

 

Background: Excessive wear and failure of the main rotor mast thrust bearing have occurred. This Directive has been amended to include Kawasaki-Bell Helicopters.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.