AD/BELL 206/137 - Fuel Drain Tubes

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B04451 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters

 

AD/BELL 206/137 Fuel Drain Tubes 9/96

Applicability: To the following model and S/N Bell helicopters:

 

Model:

206L-1

S/N 45154 to 45790

 

206L-3

51001 to 51612

 

206L-4

52001 to 52158

 

Requirement: To ensure fuel being drained from the airframe fuel filter is not being forced upwards into the fuel pump seal or starter generator seal, rework the drain tubes as detailed in Bell Alert Service Bulletin 206L-96-103 Revision A dated 25 March 1996.

 

Note: Transport Canada AD CF-96-10 dated 26 April 1996 refers.

 

Compliance: Unless previously carried out, prior to 30 October 1996.

 

Background: There has been reports of fuel migrating up to the fuel pump and starter-generator through their respective drain tubes during airframe fuel filter drainage. If not corrected a fire hazard could result.

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.