AD/BEECH 90/56 Amdt 3 - Fuselage Structural Fatigue

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B04244 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 



Beechcraft 90 and 65-90 (King Air) Series Aeroplanes

 

AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/BEECH 90/56 Amdt 2 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

 

AD/BEECH 90/56

Amdt 3


Fuselage Structural Fatigue 12/2000

 

Applicability: Models 65-90, 65-A90, B90, C90, C90A and E90.

 

Requirement: Inspect the fuselage structure, and retire the fuselage life-limited components, in accordance with Section 5-11-00, Fuselage and Associated Structure, in the Beech King Air 90 Maintenance Manual P/N 90-590012-13B7 as Revised July 30 1999.

 

Compliance: Not later than the times shown in the Beech King Air 90 Maintenance Manual.

 

Note: Compliance with previous issues of this Directive, satisfies the initial inspection requirements of this issue.

 

This Amendment becomes effective on 30 November 2000.

 

Background: The original issue of this AD promulgated a fatigue life limitation for the fuselage. It became effective on 31 March 1981.

 

Amendment 1 became effective on 7 October 1999 and allowed continued operation beyond the previous life limitation, based on an inspection program developed by the manufacturer and published in the maintenance Manual.

 

Amendment 2 was issued on 2 December 1999 to correct administrative problems which occurred during processing of Amendment 1.

 

Amendment 3 corrects a minor error and reflects the current amendment status of the Maintenance Manual.


 

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 17 October 2000

 


The above AD is notified in the Commonwealth of Australia Gazette on 1 November 2000.

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.