AD/BEECH 55/26 - Electrical Cable Loom

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B03976 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Beechcraft 55, 58 and 95-55 (Baron) Series Aeroplanes

 

AD/BEECH 55/26 Electrical Cable Loom 11/71

Applicability: Model E55 and Model 58.

 

Requirement: Inspect electrical cables behind lower left hand circuit breaker panel adjacent to the control pedestal to ascertain that there is adequate clearance between the cable loom and any panels or screws connecting leads to the rear of the circuit breakers. Also inspect loom for chafing where it passes through the stand-off pillar clip and check that this clip is still well insulated.

 

Note: It may be necessary to increase the length of the stand-off pillar to ensure that the loom will have adequate clearance.

 

Compliance: Within 15 hours time in service after 21 October 1971.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.