AD/BEECH 33/32 Amdt 2 - Rudder Pedal Arms

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B03799 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Beechcraft 33 and 35-33 (Debonair/Bonanza) Series Aeroplanes

 

AD/BEECH 33/32

Amdt 2


Rudder Pedal Arms 4/95

 

Applicability: All models fitted with rudder pedal arms P/N 50-524326, all dash numbers.

 

Requirement: Inspect the upper portion of each rudder pedal arm for cracks, using the fluorescent dye penetrant method in accordance with CAO 108.10.

 

The area to be inspected includes the upper part of the “I” section shank, the hollow crossbar and the brake pedal attachment lugs. Particular attention must be paid to the fillet radii and holes.

 

Compliance: Initially inspect before the issue of the next maintenance release after 31 October 1987.

 

Re-inspect at intervals not to exceed 12 months. Inspect before flight if the aircraft has been parked for more than 3 months with the rudder pedals locked. This amendment becomes effective 30 March 1995.

 

Note: The Maintenance Manual prohibits towing with the rudder pedals locked. This practice may also cause premature cracking.

 

Background: A review of cracked rudder pedals suggests that the primary cause of cracking is wind loads when the aircraft is parked on the ground with the rudder pedals locked, normal operating loads being a secondary factor. The inspection interval is now based on calendar time, special provision is made for aircraft parked in the open for long periods and a warning has been added about correct towing practice.

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.