AD/BEECH 200/37 - Nacelle Fuel Tank Probe

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B03694 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Beechcraft 200 (Super King Air) Series Aeroplanes

 

AD/BEECH 200/37 Nacelle Fuel Tank Probe 11/81

Applicability: All models.

 

Requirement: 1. Remove fuel quantity probe from L/H and R/H nacelle fuel tanks, wipe clean of all moisture and contaminants and wash thoroughly in clean kerosene.

 

2.    Drain and flush L/H and R/H nacelle fuel tanks.

 

3.    Replace fuel quantity probes and, on refuelling nacelle tanks, note that tank quantities match fuel quantity indicators.

 

Compliance: For aircraft which have achieved 1900 hours time in service: within 100 hours time in service after 20 October 1981. For aircraft which have achieved less than 1900 hours time in service: before achieving 2000 hours time in service. Thereafter the requirement shall be carried out at intervals not exceeding 2000 hours time in service OR twelve months, whichever is the lesser.

 

Background: It has been found that water contamination of the nacelle fuel tank quantity probes will cause a high indication, even with empty tanks.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.