AD/BEA 109/2 - Propeller Inspection and Operating Restriction

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B03572 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Beagle A109 (Airedale) Series Aeroplanes

 

AD/BEA 109/2 Propeller Inspection and Operating Restriction 1/70

Applicability: All models fitted with McCauley 2D36C14/78KM-4 propellers.

 

Requirement: 1. Visually inspect blades for damage with the aid of a 10 power (2 1/2x) glass for defects such as erosion, scratches, nicks, cracks, etc. Rectify as necessary. After rectification dye penetrant inspect the entire blade from hub to tip.

 

Note: This work can be performed without removing the propeller from the engine.

 

2. Install a placard on the instrument panel adjacent to the RPM indicator reading as follows:

 

"AVOID CONTINUOUS OPERATION WHILE DESCENDING BETWEEN 2250 AND 2550 RPM WITH MANIFOLD PRESSURE SETTINGS BELOW

15 INCHES Hg."

 

Note: McCauley service Bulletin No. 76 also refers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.