AD/B747/246 Amdt 2 - Wing Front Spar Web

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B03143 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AIRWORTHINESS DIRECTIVE


For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B747/246 Amdt 1 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.


 

Boeing 747 Series Aeroplanes

 

AD/B747/246

Amdt 2


Wing Front Spar Web 11/2003

 

 

Applicability: Model 747 series aircraft, as listed in Boeing Service Bulletin 747-57A2311 Revision 2, dated 21 February 2002.

 

Requirement: Inspect in accordance with the technical requirements of FAA AD 2003-16-12 Amdt 39-13265.

 

Note: Boeing Alert Service Bulletins 747-57A2311, 747-57A2311Revision 1, including Appendices A and B, and 747-57A2311 Revision 2 refer.

 

Compliance: As specified in the Requirement document, with a revised effective date of 30 October 2003.

 

This Amendment becomes effective on 30 October 2003.

 

Background: The FAA required inspections to detect and correct fatigue cracking of the wing front spar web, which could result in fuel leaking onto an engine and a consequent fire.

 

Amendment 1 corrected compliance repeat inspection frequency.

 

Amendment 2 is issued in response to a new FAA AD, which changes applicability, changes certain compliance times, adds certain new requirements, and introduces an optional modification.

 


Amendment 1 of this Airworthiness Directive became effective on 6 September 2001. The original issue of this Airworthiness Directive became effective on 12 July 2001.

David Villiers

Delegate of the Civil Aviation Safety Authority 10 September 2003

 

The above AD is notified in the Commonwealth of Australia Gazette on 8 October 2003.

 

 


Page 1 of 1

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.