AD/ANSON/8 - Fuel Crossfeed Cock Placard - Installation

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B02425 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Avro Anson and Avro 19 Series Aeroplanes

 

AD/ANSON/8 Fuel Crossfeed Cock Placard - Installation 3/52

Applicability: Anson.

 

Requirement: Install a placard adjacent to the fuel crossfeed cock, indicating clearly the “ON” and “OFF” positions of the cock when viewed from the pilot’s seat; or

 

ANO 105.1.31.4.5.9.

 

Compliance: Forthwith.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Overview

The Civil Aviation Regulations 1998, specifically under PART 39 - 105, include the Civil Aviation Safety Authority Schedule of Airworthiness Directives, which was enacted to ensure the safety and airworthiness of aircraft operating in Australia. One such directive, AD/ANSON/8, pertains to the Avro Anson and Avro 19 Series Aeroplanes, addressing the need for clear operational guidance to pilots. The directive requires the installation of a placard adjacent to the fuel crossfeed cock, indicating the “ON” and “OFF” positions when viewed from the pilot’s seat, thereby enhancing operational safety by reducing the potential for human error during flight. This directive was issued by the Civil Aviation Safety Authority to meet the regulatory standards set by the Commonwealth of Australia, aiming to maintain the highest level of aviation safety and to comply with the specific requirements outlined in ANO 105.1.31.4.5.9. Compliance with this directive is mandated forthwith to ensure immediate implementation.

Scope and Application

The Civil Aviation Regulations 1998, as part of Part 39 - 105, specifically addresses the airworthiness directives concerning the Avro Anson and Avro 19 Series Aeroplanes, including the directive AD/ANSON/8 which mandates the installation of a placard adjacent to the fuel crossfeed cock. This directive applies to all aircraft of the Anson model, ensuring that the placard clearly indicates the “ON” and “OFF” positions of the fuel crossfeed cock when viewed from the pilot’s seat. The requirement necessitates immediate compliance, highlighting the importance of this directive for the safe operation of the aircraft. This regulation falls within the jurisdiction of the Commonwealth of Australia and is enforced by the Civil Aviation Safety Authority, thereby impacting all entities and persons operating such aircraft within the national airspace. The scope of this regulation is confined to the specific aircraft models mentioned and is enforced by the Civil Aviation Safety Authority under the overarching framework of the Civil Aviation Regulations 1998. There are no stated exclusions or exemptions within the directive itself, and compliance is mandated forthwith, underscoring the urgency and necessity of adhering to this safety measure. The regulation's application is extended through the subordinate instrument AD/ANSON/8, which specifies the technical and operational requirements that must be met to ensure compliance.

Key Provisions

The Civil Aviation Regulations 1998, specifically Part 39, outlines various directives to ensure the safety and airworthiness of aircraft. One such directive, AD/ANSON/8, pertains to the installation of a fuel crossfeed cock placard on Avro Anson and Avro 19 Series aeroplanes (section 3/52). This directive mandates that a placard must be installed adjacent to the fuel crossfeed cock, clearly indicating the "ON" and "OFF" positions when viewed from the pilot’s seat. This requirement aims to ensure that pilots can quickly and accurately identify the status of the fuel crossfeed cock during flight operations. Entities governed by these regulations, particularly operators of Avro Anson and Avro 19 Series aeroplanes, must comply with AD/ANSON/8 without delay. This entails installing the specified placard in the prescribed location and ensuring that it meets the criteria for clarity and visibility. Non-compliance with this directive could potentially compromise flight safety by increasing the risk of operational errors related to fuel management. Breaches of the Civil Aviation Regulations 1998, including failure to comply with AD/ANSON/8, can have significant consequences. While the specific penalties for non-compliance are not detailed in the provided text, general provisions under the Civil Aviation Act 1988 may apply. These can include fines and potential criminal charges, depending on the severity and impact of the breach. The regulatory framework is designed to ensure that all parties adhere strictly to airworthiness directives to maintain the highest safety standards in civil aviation. In summary, AD/ANSON/8 requires the installation of a clear placard on the fuel crossfeed cock of Avro Anson and Avro 19 Series aeroplanes. Operators must ensure compliance without delay, as non-compliance could lead to serious safety issues and potential legal repercussions, including fines and criminal charges. The overarching goal is to maintain the airworthiness and safety of these aircraft in accordance with the stringent standards set forth by the Civil Aviation Regulations 1998.

Legal classification tags

Area of Law
Administrative Law
Instrument
Legislative Instrument
Concepts
Definitions & Interpretation
Compliance Obligations
Regulatory Standards

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.