AD/ALF/3 - Compressor Housing Support Assembly 2-103-070-07 - Inspection and Replacement

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B02317 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


AlliedSignal (Lycoming) Turbine Engines - ALF502 and LF507 Series

 

AD/ALF/3  Compressor Housing Support Assembly 2-103-070-07 - Inspection and Replacement


1/86

 

Applicability: Lycoming model ALF 502L-2 turbofan engine S/Nos. LF03020, LF03021, LF03038, LF03039.

 

Document: 1. Lycoming SB No. ALF 502-72-0014; or

 

2. AD/LYC-T/20.

 

Compliance: 1. Immediately upon receipt of this Directive and after each 100 hours of engine operation thereafter until affected support assemblies are replaced.

 

2. Affected compressor housing support assemblies must be replaced not later than 800 hours or 600 cycles time in service whichever occurs first.

 

Background:  This Directive is issued as the result of notification from the engine manufacturer that the affected engines were installed with the rear engine mount improperly assembled. With this condition, normal flight loads may have imposed excessive stress on the compressor housing support assembly engine mounting lugs. Affected mounting lugs must be periodically inspected for possible cracks until compressor housing support assembly is replaced.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.