AD/AC/56 Amdt 3 - Elevator Control System Bob Weight Installation - Inspection and Modification

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B02115 In force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Twin Commander (Gulfstream/Rockwell/ Aerocommander 500, 600 and 700) Series Aeroplanes

 

AD/AC/56

Amdt 3


Elevator Control System Bob Weight Installation - Inspection and Modification


3/82

 

Applicability: Models 500, 500A, 500B, 500S, 500U, 520, 560, 560A, 560E, 560F, 680, 680E,

680F, 680F(P) and 720, S/Nos. 1 to 3323 except those aircraft which have complied with Rockwell International Service Bulletins No. 129 Rev. 4 and No. 136 Rev. 3 dated 26 January 1981 as applicable.

 

Document: Gulfstream American Service Information No. SI-176.

 

Note: Rockwell International SB 179 and FAA AD 75-12-09 Amendment 39-4246 refer.

 

Compliance: 1. Unless already accomplished, initially inspect within the next 25 hours’ time in service after 8 February 1982, and thereafter at intervals not exceeding 60 hours time in service until modified.

 

2. Modify within 500 hours time in service after 8 February, 1982.

 

Note: Aircraft certified to comply with AD/AC/56B and AD/AC/58B are deemed to comply with this Directive.

 

Background: Cracks have been found in the bob weight side supports of six overseas registered aeroplanes. Effectivity has been extended by aircraft serial number and the requirements of AD/AC/56B and AD/AC/58B have been consolidated into this AD.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.