AD/AA-1/12 - Fuel Tank Vent Lines and Fuel Contents Gauge Lines - Modification

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au F2006B02023 Not in force Legislative Instrument

Legislation content

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 


Gulfstream (Grumman American/ American Aviation) AA-1 Series Aeroplanes

 

AD/AA-1/12 Fuel Tank Vent Lines and Fuel Contents

Gauge Lines - Modification


7/73

 

Applicability: All models.

 

Requirement: 1. Replace all PVC plastic hose connectors on the fuel tank venting system, and the fuel contents gauge system with fuel resistant rubber hose connectors.

 

2.    Where practicable, bead the ends of the aluminium alloy vent lines where joined by the nose connectors.

 

3.    Where hose connectors are used between adjoining aluminium alloy vent lines ensure that the end distance between the lines is no greater than 1/2".

 

4.    Replace all spring wire type hose clips on the fuel tank venting system and the fuel contents gauge system with screw type hose clips.

 

Compliance: Within 100 hours time in service after 31 August 1973.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.